Fully Automatic Shrinking Pipe Machine
Model: HS-2000
- This machine adopts PLC programmable control operation, with clear and easy-to-use button labels.
- This machine is equipped with a processing abnormality detection device to ensure the integrity of the workpiece.
- Workpiece length adjustment is achieved through a single handwheel operation, which is convenient and time-saving.
- No need to change the fixture when changing workpieces of different diameters.
- This machine can shrink tubes on one side, both sides, and in different shapes.
- This machine does not require a dedicated operator during production, has high output and good stability, and can produce up to 1000 tubes per hour. (Semi-automatic tube shrinking machine, requires dedicated operator).
Machine Specifications
| Item | Model | ||||
| HS - 1000 | HS - 1500 | HS - 2000 | HS - 2500 | ||
| hydraulic pump HP | 7½ | 7½ | 7½ | 7½ | |
| materials infeed | 1/4HP | 1/4HP | 1/2HP | 1/2HP | |
| material | 1/2 - 1" Ø | 1/2 - 1" Ø | 1/2 - 1" Ø | 1/2 - 1" Ø | |
| 5/8 - 1¾ Ø | 5/8 - 1¾ Ø | 5/8 - 1¾ Ø | 5/8 - 1¾ Ø | ||
| 7/8 - 2" | 7/8 - 2" | 7/8 - 2" | 7/8 - 2" | ||
| 1½" Ø - 3" | 1½" Ø - 3" | 1½" Ø - 3" | 1½" Ø - 3" | ||
Recommend
Pipe Bending Machine
Model: NC-320
- Computer touch screen display, automatic angle control, with left and right angle control groups that can be adjusted at any time on the operation panel. The computer panel can set five different angles for each side of the continuous bending process.
- The computer screen operation panel displays both Chinese and English upon startup, allowing for easy operation.
- For hydraulic power, a dual-pump system is used, with one hydraulic pressure and one hydraulic circuit for each side, enabling individual control of the left and right angles for stability.
- After bending, when the rotating arm returns to its original position, a pressure stabilizing system is installed to prevent mechanical vibration, thus preventing damage and extending the machine's lifespan.
Full Automatic Milling Machine for 4-Side
Model: YU-65RB
- Automatic 90˚ mechanical rotation for cutting another plane
- Can perform one or two cuts on the same plane depending on workpiece size
- Automatic loading and unloading
- Equipped with a protective cover
- Equipped with a lubrication device during cutting
Automatic Double-Headed Chamfering Machine
The Automatic Double-Headed Chamfering Machine is an industrial equipment that automatically machines angled edges on tubes and bars. It processes both ends in a single cycle, improving edge quality, removing sharp edges, and preparing workpieces for further processing or assembly. It is widely applied in metal fabrication, automotive parts, and machinery manufacturing.
Tube End Forming Machine
Type: YU-50TM
- Double-sided tube end extrusion, suitable for automotive chair parts
- Manual loading and unloading
Double Bending Pipe Machine
Model: NC-350
- Computer touch screen display, automatic angle control, with left and right angles that can be adjusted at any time on the operation panel. The computer panel can set five different angles for each side of the continuous bending process.
- The computer screen operation panel displays both Chinese and English upon startup, allowing for easy operation.
- For hydraulic power, a dual-pump system is used, with one hydraulic pressure and one hydraulic circuit for each side, enabling individual control of the left and right angles for stability.
- After bending, a pressure stabilizing system is installed when the rotating arm returns to its original position to prevent mechanical vibration, thus extending the machine's lifespan.